Video presentation
Product features
01
The accuracy and the efficiency is high.
02
The equipment work cycle (initial test + milling + retest) can reach 40 seconds, and the test and milling are carried out at the same time
03
Single-sided balance, cylindrical or end face milling, quick model change, parameterized adjustment, simple operation and strong compatibility
04
It can be single machine automatic balance, online automatic line for automatic production, and can be equipped with MES system to realize data traceability
Product display
Sample Rotor
Technical Parameters
| Two-station Brake Disc Automatic Balancing Machine | |
| Item | Machine Specification |
| Machine name | Two-stationautomatic balancing machinefor brake disc（Embedded software products - Jizhi automatic balancing machine control software for brake disc V1.0） |
| Model no. | BPXDX-2W-B |
| Main components specification | Cylinder: SMC |
| Guide rail: HIWIN | |
| Screw: PMI | |
| Servo motor: Mitsubishi、Panasonic | |
| Sensor : KEYENCE, OMRON, CONTROLWAY | |
| Touch screen : KEYENCE 10.4' | |
| Control PLC: KEYENCE KV-3000 | |
| Cutting motor: ALPHA | |
| Rotor apply range | Inner hole of work-piece：Φ54-91mm（customizable） |
| Outer diameter of work-piece：Φ220-410mm | |
| Cutting width：10-30mm | |
| Cutting depth：<=5mm | |
| Speed | 500-900rpm |
| Cutting method | T cutter outer milling |
| Power supply | AC380V |
| Air supply | 0.4~0.6Mpa |
| Cycle time | 30-40s |
| Residual unbalance | Better than G6.3 |
| Volume | 2300 x1500 x 2100 mm |
Remark: Based on actual specifications (can be negotiated accroding to customer's requiement)
product details
